How To Create Iscsi Target In Windows 2008
Afterwards Microsoft released its free iSCSI target for Windows Server 2008 R2, nosotros posted a guide on how to install the iSCSI target software on a server. The adjacent logical step was to create a guide for creating a target. To simplify the demo a bit, I also decided to apply a virtual disk.
Examination Configuration
For this guide I merely used the Big WHS which uses Windows Server 2008 R2 as a base.
- CPU: Intel Xeon W3550
- Motherboard: Supermicro X8ST3-F
- Memory: 24GB ECC unbuffered DDR3 DIMMs (6x 4GB)
- Case (1): Norco RPC-4020
- Case (2): Norco RPC-4220
- Drives: 8x Seagate 7200rpm 1.5TB, 4x Hitachi 5K3000 2TB, 20x Hitachi 7200rpm 2TB, 8x Western Digital Dark-green one.5TB EADS, 2x Western Digital Green 2TB EARS.
- SSD: 2x Intel X25-V 40GB
- Controller: Areca ARC-1680LP (second ane)
- SAS Expanders: 2x HP SAS Expander (one in each enclosure)
- NIC (additional): 1x Intel Pro/1000 PT Quad , 1x Intel Intel Pro/1000 GT (PCI), Intel EXPX9501AT 10GigE
- Host OS: Windows Server 2008 R2 with Hyper-5 installed
- Fan Partitions updated with 120mm fans
- PCMIG board to power the HP SAS Expander in the Norco RPC-4220
- Main switch – Dell PowerConnect 2724
With plenty of drives, beingness able to consign volumes using iSCSI is of import on the network.
Installing the iSCSI Target
In the interest of brevity, I take skipped a few of the click-through and add your description screens in this guide. The first step from inside the Microsoft iSCSI Software Target is to create an iSCSI target which brings up a wizard.
The wizard is relatively straightforward.
One needs to supply an iSCSI target name and one should also provide a clarification. As the number of targets rises, this helps keep things articulate. Target 1 and Target 2 were used only to have the screenshots for this guide and better descriptors should be used.
After this, one then needs to gear up the IQN. There are quite a few options here, including IP address, MAC accost, and DNS domain name.
Completing this wizard leaves one with an iSCSI target that points to nothing since we have not pointed the iSCSI target to a disk yet. For this one should create a new virtual disk (or 1 can import one if one is already bachelor.)
In the Create Virtual Disk Magician 1 has much fewer options than one does in the Hyper-V virtual disk wizard. The offset step is defining a path. Hint, you should browse to the path on the host system and so type the proper noun in a "name.vhd" format.
The other major thing one needs to do is assign a size to the virtual disk. Here I am using 40000MB, or the guess size of an Intel X25-V 40GB drive which is enough for most Linux installations.
One now has a target, and a virtual disk, but needs to link the 2. In the access screen, click Add then link the VHD and iSCSI target.
Once this is washed, you are prepare to employ an iSCSI initiator to connect to the virtual hard disk.
Conclusion
This may be i of the easiest iSCSI targets to gear up, on par with the unproblematic web interfaces of operating systems like Nexenta. iSCSI is a very popular protocol that lets 1 do many absurd things. In virtualized environments, iSCSI is very pop so for those users setting up test environments, the free iSCSI target is a great way to play with Hyper-Five and iSCSI disks.
Source: https://www.servethehome.com/creating-iscsi-target-vhd-windows-server-2008-r2/
Posted by: rosadoanxich.blogspot.com
0 Response to "How To Create Iscsi Target In Windows 2008"
Post a Comment